A-Arm Components

A-Arm Components

Whether you are an A-Arm fabricator or building complete frames, we offer a few items that might make your projects easier.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

10mm Shock Bolt Tabs for 3/4" Tubing (package of 4)
5% discount for 5 packages; 10% discount for 10 packages.

CNC Laser Cut A-Arm Shock Mount Tabs. (radius fits 3/4" tubing)

3/16" Thick Mild Steel with 10mm Hole.

Sold in package of four pieces.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

10mm Shock Bolt Tabs for 7/8" Tubing (package of 4)
5% discount for 5 packages; 10% discount for 10 packages.

CNC Laser Cut A-Arm Shock Mount Tabs. (radius fits 7/8" tubing)

3/16" Thick Mild Steel with 10mm Hole.

Sold in package of four pieces.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Hillshooter 4-Piece Front Spindle Set, Banshee

4130 Billet Chromoly CNC Machined "Sandragon-Style" Front Spindle Set.

Intended for aftermarket chassis with upper and lower front a-arms.

Banshee Configured Horizontals Bored 2 Degrees for Verticals.

Set Your Desired Horizontal Heights then Tig Weld to Verticals.

Verticals are Tapped 3/8"-24 Top and Bottom.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Stainless Steel A-Arm Seal Caps (12 piece set)
5% discount for 5 sets; 10% discount for 10 sets.

Banshee A-Arm Custom Sealing End Caps.

Polished Solid Stainless Steel with Bonded Rubber Seals.

Will Never Chip, Flake or Rust!

Full set of 12 pieces.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Tie Rod Ends, 3/8" (4 piece set)
5% discount for 5 sets; 10% discount for 10 sets.

Heavy-Duty Ends for coupling aftermarket Tie Rods to aftermarket Spindles and Steering Stem.

Each Tie Rod End has a 3250 Lb. Static Load Capacity.

Self-Lubricating Nylon Race - No Squeaks, No Rattles, No Maintenance.

Integral Ball/High Tensile 3/8"-24 Stud.

Set of 2 Right Hand 3/8-24" and 2 Left Hand 3/8"-24, Yellow Zinc Plated.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

A-Arm Heim Joints, 3/8" (Package of 4)
5% discount for 5 packages; 10% discount for 10 packages.

Heavy-Duty Heims for the Frame End of custom aftermarket A-Arms.

Each Heim Joint has a 3200 Lb. Static Load Capacity.

Self-Lubricating Nylon Race - No Squeaks, No Rattles, No Maintenance.

3/8"-24 Right Hand Thread, Yellow Zinc Plated.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Weld-On Bullet Heim Sockets (Package of 4)
5% discount for 5 packages; 10% discount for 10 packages.

To be Welded on to the Spindle End of custom aftermarket A-Arms.

1/2"-20 R.H. Heims (see below) will screw right in.

100% CNC MACHINED 1018 BILLET STEEL

Package of 4 - enough for one set of a-arms.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

A-Arm Heim Joints, 1/2" (Package of 4)
5% discount for 5 packages; 10% discount for 10 packages.

Heavy-Duty Heims for the Spindle End of custom aftermarket A-Arms.

Each Heim Joint has a 6400 Lb. Static Load Capacity.

Self-Lubricating Nylon Race - No Squeaks, No Rattles, No Maintenance.

1/2"-20 Right Hand Thread, Yellow Zinc Plated.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

High Misalignment Bushings (Package of 8)
5% discount for 5 packages; 10% discount for 10 packages.

* Hard-to-find smaller sizes for your custom a-arms and spindles.

* Increase usable Heim joint angle to over 45 degrees.

* 7/16" bushings fit 7/16" Heims and have a 5/16" diameter bore.

* 1/2" bushings fit 1/2" Heims and have a 3/8" diameter bore.

100% CNC MACHINED BILLET STAINLESS STEEL

Sold in packages of 8 bushings - enough for 4 Heim joints or one set of A-Arms.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

USA MATERIALS / USA LABOR