Other ATV Stuff

Other ATV Stuff

FREE UPS GROUND SHIPPING TO THE LOWER 48 STATES ON ALL ORDERS PLACED ONLINE!

Keihin Billet Idle Screws, Pair

Billet Stainless Steel CNC Machined Hex Idle Screws

Keihin's Plastic Idle Screws and a blade screwdriver... WHAT A JOKE!

Now you easily adjust BOTH carbs with an 8mm end wrench.

(Replaces O.E.M. plastic screws in 28mm through 41mm PWK carbs)

(Replaces Sudco P/N 018-569 plastic idle screw)

Easy to keep track of how many hex "flats" each carb is adjusted.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Lectron Cable Adjusters (Pkg. of 2)

Do your cable ends fit loose and sloppy in the top of your brass Lectron carburetor screws?

"JJ and A Racing" adjuster screws are designed to fit your cable ends properly! We have also added 4mm to the upper thread length to allow more room for your lock nuts.

Purple anodized CNC machined 6061-T6 billet aluminum.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Flush Mount Chrome Tire Valves (Set of 4)

The tire valve business has been turned "upside down!" New advanced internal design for tire inflation.

* Made especially for custom and racing wheels.
* Smooth appearance - low profile, prevents broken stems.
* Makes cleaning and polishing easier.
* 2 inflation adapters included.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Ignition Timing Indicator Assembly

14mm Spark Plug Thread Dial Indicator

Comes with everything shown here.

If you are running a PVL ignition, you should have one of these in your toolbox!

(WILL NOT CLEAR COOLING FINS OF AIR-COOLED HEADS)

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Banshee 5/8" Spindle Bearing Conversion Kit

Convert your BANSHEE Front Hubs to fit 5/8" Straight Drag Spindles.

(Your 5/8" diameter front spindles must be at least 3-1/4" long)

This kit consists of: two 42mm O.D. sealed inner bearings, two 35mm O.D. sealed outer bearings, two custom billet aluminum CNC machined spacer bushings and two nylock jam nuts.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Honda TRX250R 5/8" Spindle Bearing Conversion Kit

Convert your 1988/1989 HONDA TRX250R Front Hubs to fit 5/8" Straight Drag Spindles.

FITS 1988/1989 HONDA HUBS ONLY... WILL NOT WORK WITH 1986/1987 HONDA HUBS.

(Your 5/8" diameter front spindles must be at least 2-1/4" long)

This kit consists of: two 42mm O.D. sealed inner bearings, two 35mm O.D. sealed outer bearings, two custom billet aluminum CNC machined spacer bushings and two nylock jam nuts.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Honda TRX400EX 5/8" Spindle Bearing Conversion Kit

Convert your HONDA TRX400EX Front Hubs to fit 5/8" Straight Drag Spindles.

(Your 5/8" diameter front spindles must be at least 2-1/4" long)

This kit consists of: two 42mm O.D. sealed inner bearings, two 35mm O.D. sealed outer bearings, two custom billet aluminum CNC machined spacer bushings and two nylock jam nuts.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Drag Racing Staging Disk, 4-BOLT (price for one disk)

Lightweight non-transparent plastic disk to insure the staging lights don't shine "through" your front wheels!

Only one disk is needed to do the job. Mount to either wheel. Fits the 4-bolt brake rotor bolt pattern of YFZ450, Banshee, 660 Raptor, 700 Raptor and '86'/87 TRX250R front wheel hubs.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Drag Racing Staging Disk, 3-BOLT (price for one disk)

Lightweight black plastic disk to insure the staging lights don't shine "through" your front wheels!

Only one disk is needed to do the job. Mount to either wheel. Fits the 3-bolt brake rotor bolt pattern of TRX400EX, TRX450R and '88/'89 TRX250R front wheel hubs.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Aluminum Drag Bars, Twist Throttle Style - CLOSE OUT SALE

6061-T6 Straight Aluminum Tubing ATV Drag Handlebars.

7/8" O.D. x .125" Wall, 26-1/2" Long

Twist Style Throttle - Diamond Pattern CNC Knurl machined on Clutch End Only

No Need for a Heavy Rubber Grip on the clutch side!!

Tubing is raw - ready for you to polish, aonodize or powdercoat.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Weight: 0.74 lbs

Brushed Aluminum Vinyl Die-Cut 8-Piece Sticker Set

Eight total stickers for your bike, toolbox, truck, trailer etc.

4 each: 8" long

2 each: 24" long

2 each: 36" long

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Black Vinyl Die-Cut 8-Piece Sticker Set

Eight total stickers for your bike, toolbox, truck, trailer etc.

4 each: 8" long

2 each: 24" long

2 each: 36" long

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

2004/2005 YFZ450 Carrier Seals for our Aluminum Axle

If you have a JJ and A Racing axle in your 2004/2005 YFZ450, this is the correct dust seal set that will install directly in the 62mm bore of your OEM or aftermarket bearing carrier.

Package of two seals.

FREE SHIPPING UPS Ground to the lower 48 states for on-line orders.

2006-2010 YFZ/Raptor Carrier Seals for our Aluminum Axle

We have these seals custom-made specifically for our aluminum axle application.

If you have a JJ and A Racing axle in your 2006-2010 YFZ450 or Raptor 700, this is the correct dust seal set that will install directly in the 64mm bore of your OEM or OEM-style aftermarket bearing carrier.

Package of two seals.

FREE SHIPPING UPS Ground to the lower 48 states for on-line orders.

35mm Bearing/Seal Kit, Twin-Row Style

Twin-Row Style Bearing/Seal Kit

35mm for Banshee or 660 Raptor running stock diameter steel axle.

4 bearings: #6007-2RS

2 seals: 42-62-8 for sprocket side and 43-62-8 for brake side

This is a replacement kit designed to fit a 35mm twin-row style aftermarket bearing carrier.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

40mm REPLACEMENT Bearing/Seal Kit, Twin-Row Style

THIS IS NOT A KIT TO CONVERT A 35mm CARRIER TO A 40mm CARRIER...

THIS IS A BEARING AND SEAL "REPLACEMENT" KIT...

CHECK YOUR BEARING AND SEAL NUMBERS BEFORE ORDERING.

4 bearings: #6908-2RS (CHECK YOUR BEARING NUMBERS)

2 seals: 52-62-8 (CHECK YOUR SEAL NUMBERS)

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

35mm Bearing/Seal Kit, Single-Row Style

Single-Row Style Bearing/Seal Kit

35mm for Banshee or 660 Raptor running stock diameter steel axle.

2 bearings: #6007-2RS

2 seals: 42-62-8 for sprocket side and 43-62-8 for brake side.

This is a replacement kit designed to fit a stock 35mm bearing carrier.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

40mm REPLACEMENT Bearing/Seal Kit, Single-Row Style

THIS IS NOT A KIT TO CONVERT A 35mm CARRIER TO A 40mm CARRIER...

THIS IS A BEARING AND SEAL "REPLACEMENT" KIT...

CHECK YOUR BEARING AND SEAL NUMBERS BEFORE ORDERING.

2 bearings: #6908-2RS (CHECK YOUR BEARING NUMBER)

2 seals: 52-62-8 (CHECK YOUR SEAL NUMBER)

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Honda 250R Airbox Eliminator

Take your ugly stock air filter box off and throw it away!

This custom anodized aluminum adaptor ring will allow you to clamp your K&N filter directly to the rubber boot on the back of your carb.

Fits 1986 through 1989 Honda TRX250R.

Available in your choice of Red or Blue.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.