Other Stuff

Other Stuff

FREE UPS GROUND SHIPPING TO THE LOWER 48 STATES ON ALL ORDERS PLACED ONLINE!

Keihin Billet Idle Screws, Pair

Billet Stainless Steel CNC Machined Hex Idle Screws

Keihin's Plastic Idle Screws and a blade screwdriver... WHAT A JOKE!

Now you easily adjust BOTH carbs with an 8mm end wrench.

(Replaces O.E.M. plastic screws in 28mm through 41mm PWK carbs)

(Replaces Sudco P/N 018-569 plastic idle screw)

Easy to keep track of how many hex "flats" each carb is adjusted.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Lectron Cable Adjusters (Pkg. of 2)

Do your cable ends fit loose and sloppy in the top of your brass Lectron carburetor screws?

"JJ and A Racing" adjuster screws are designed to fit your cable ends properly! We have also added 4mm to the upper thread length to allow more room for your lock nuts.

Purple anodized CNC machined 6061-T6 billet aluminum.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Crankshaft Stroke Gage

The "Lie Detector"...

Check the stroke of an ATV engine without even pulling the head!

This custom gage just screws into a 14mm spark plug hole.

Will measure up to 76mm total stroke (Banshee with up to 22 mil crank)

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Flush Mount Chrome Tire Valves (Set of 4)

The tire valve business has been turned "upside down!" New advanced internal design for tire inflation.

* Made especially for custom and racing wheels.
* Smooth appearance - low profile, prevents broken stems.
* Makes cleaning and polishing easier.
* 2 inflation adapters included.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Ignition Timing Indicator Assembly

14mm Spark Plug Thread Dial Indicator

Complete with everything shown here.

If you are running a PVL ignition, you should have one of these in your toolbox!

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Banshee 5/8" Spindle Bearing Conversion Kit

Convert your Banshee Front Hubs to fit 5/8" Straight Drag Spindles.

(Your 5/8" diameter front spindles must be at least 3-1/4" long)

This kit consists of: two 42mm O.D. sealed inner bearings, two 35mm O.D. sealed outer bearings, two custom billet aluminum CNC machined spacer bushings and two nylock jam nuts.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Drag Racing Staging Disk, 4-BOLT (price for one disk)

Lightweight non-transparent plastic disk to insure the staging lights don't shine "through" your front wheels!

Only one disk is needed to do the job. Mount to either wheel. Fits the 4-bolt brake rotor bolt pattern of YFZ450, Banshee, 660 Raptor, 700 Raptor and '86'/87 TRX250R front wheel hubs.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Drag Racing Staging Disk, 3-BOLT (price for one disk)

Lightweight black plastic disk to insure the staging lights don't shine "through" your front wheels!

Only one disk is needed to do the job. Mount to either wheel. Fits the 3-bolt brake rotor bolt pattern of TRX400EX, TRX450R and '88/'89 TRX250R front wheel hubs.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Billet Stingers for Shearer Drag Pipes, (Set of 2)

1" bore straight-through stinger tips to fit Shearer Drag Pipes.

THESE ARE NOT SILENCERS... THEY ARE FOR THE TRACK!

These look similar to silencers with "cooling fins".

Replace your existing Shearer silencers or Shearer stingers.

CNC Machined 6061-T6 Aluminum.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Aluminum Drag Bars, Thumb Throttle Style - CLOSE OUT SALE

6061-T6 Straight Aluminum Tubing Drag Handlebars.

7/8" O.D. x .125" Wall, 26-1/2" Long

Diamond Pattern Knurl on Both Ends for Thumb Style Throttle

No Need for those Heavy Rubber Grips!!

Tubing is raw - ready for you to polish.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Weight: 0.74 lbs

Aluminum Drag Bars, Twist Throttle Style - CLOSE OUT SALE

6061-T6 Straight Aluminum Tubing Drag Handlebars.

7/8" O.D. x .125" Wall, 26-1/2" Long

Twist Style Throttle - Diamond Pattern Knurl on Clutch End Only

No Need for a Heavy Rubber Grip on the clutch side!!

Tubing is raw - ready for you to polish.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Weight: 0.74 lbs

Brushed Aluminum Vinyl Die-Cut 8-Piece Sticker Set

Eight total stickers for your bike, toolbox, truck, trailer etc.

4 each: 8" long

2 each: 24" long

2 each: 36" long

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Black Vinyl Die-Cut 8-Piece Sticker Set

Eight total stickers for your bike, toolbox, truck, trailer etc.

4 each: 8" long

2 each: 24" long

2 each: 36" long

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

35mm Bearing/Seal Kit, Twin-Row Style

Twin-Row Style Bearing/Seal Kit

35mm for Banshee or 660 Raptor running stock diameter steel axle.

4 bearings: #6007-2RS

2 seals: 42-62-8 for sprocket side and 43-62-8 for brake side

This is a replacement kit designed to fit a 35mm twin-row style aftermarket bearing carrier.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

40mm REPLACEMENT Bearing/Seal Kit, Twin-Row Style

THIS IS NOT A KIT TO CONVERT A 35mm CARRIER TO A 40mm CARRIER...

THIS IS A BEARING AND SEAL "REPLACEMENT" KIT...

CHECK YOUR BEARING AND SEAL NUMBERS BEFORE ORDERING.

4 bearings: #6908-2RS (CHECK YOUR BEARING NUMBERS)

2 seals: 52-62-8 (CHECK YOUR SEAL NUMBERS)

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

35mm Bearing/Seal Kit, Single-Row Style

Single-Row Style Bearing/Seal Kit

35mm for Banshee or 660 Raptor running stock diameter steel axle.

2 bearings: #6007-2RS

2 seals: 42-62-8 for sprocket side and 43-62-8 for brake side.

This is a replacement kit designed to fit a stock 35mm bearing carrier.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

40mm REPLACEMENT Bearing/Seal Kit, Single-Row Style

THIS IS NOT A KIT TO CONVERT A 35mm CARRIER TO A 40mm CARRIER...

THIS IS A BEARING AND SEAL "REPLACEMENT" KIT...

CHECK YOUR BEARING AND SEAL NUMBERS BEFORE ORDERING.

2 bearings: #6908-2RS (CHECK YOUR BEARING NUMBER)

2 seals: 52-62-8 (CHECK YOUR SEAL NUMBER)

FREE SHIPPING UPS Ground to lower 48 states if ordered online.

Honda 250R Airbox Eliminator

Take your ugly stock air filter box off and throw it away!

This custom anodized aluminum adaptor ring will allow you to clamp your K&N filter directly to the rubber boot on the back of your carb.

Fits 1986 through 1989 Honda TRX250R.

Available in your choice of Red or Blue.

FREE SHIPPING UPS Ground to lower 48 states if ordered online.