ATV A-Arm Components

Whether you are an A-Arm fabricator or building complete frames, we offer a few items that might make your projects easier.

FREE PRIORITY MAIL U.S. SHIPPING if ordered online.

10mm x 0.750 tab

10mm Shock Bolt Tabs for 3/4" Tubing (package of 4)

 

CNC Laser Cut A-Arm Shock Mount Tabs. (radius fits 3/4" tubing)

3/16" Thick Mild Steel with 10mm Hole.

Sold in package of four pieces.

FREE PRIORITY MAIL U.S. SHIPPING if ordered online.

10mm x 0.875 tab

10mm Shock Bolt Tabs for 7/8" Tubing (package of 4)

 

CNC Laser Cut A-Arm Shock Mount Tabs. (radius fits 7/8" tubing)

3/16" Thick Mild Steel with 10mm Hole.

Sold in package of four pieces.

FREE PRIORITY MAIL U.S. SHIPPING if ordered online.

Tie Rod Ends, 3/8" (4 piece set)

Heavy-Duty Ends for coupling aftermarket Tie Rods to aftermarket Spindles and Steering Stem.

Each Tie Rod End has a 3250 Lb. Static Load Capacity.

Self-Lubricating Nylon Race - No Squeaks, No Rattles, No Maintenance.

Integral Ball/High Tensile 3/8"-24 Stud. Set of 2 Right Hand 3/8-24" and 2 Left Hand 3/8"-24, Yellow Zinc Plated.

A-Arm Heim Joints, 3/8" (Package of 4)

Heavy-Duty Heims for the Frame End of custom aftermarket A-Arms.

Each Heim Joint has a 3200 Lb. Static Load Capacity.

Self-Lubricating Nylon Race - No Squeaks, No Rattles, No Maintenance.

3/8"-24 Right Hand Thread, Yellow Zinc Plated. 

Weld-On Bullet Heim Sockets (Package of 4)

To be Welded on to the Spindle End of custom aftermarket A-Arms.

1/2"-20 R.H. Heims (see below) will screw right in.

100% CNC MACHINED 1018 BILLET STEEL

Package of 4 - enough for one set of a-arms.

 FREE PRIORITY MAIL U.S. SHIPPING if ordered online.

A-Arm Heim Joints, 1/2" (Package of 4)

Heavy-Duty Heims for the Spindle End of custom aftermarket A-Arms.

Each Heim Joint has a 6400 Lb. Static Load Capacity.

Self-Lubricating Nylon Race - No Squeaks, No Rattles, No Maintenance.

1/2"-20 Right Hand Thread, Yellow Zinc Plated. 

High Misalignment Bushings (Package of 8)

* Hard-to-find smaller sizes for your custom a-arms and spindles.

* Increase usable Heim joint angle to over 45 degrees.

* 7/16" bushings fit 7/16" Heims and have a 5/16" diameter bore (HMBSS-7-5)

* 1/2" bushings fit 1/2" Heims and have a 3/8" diameter bore (HMBSS-8-6)

CNC MACHINED HERE IN OUR FACILITY FROM BILLET STAINLESS STEEL

Sold in packages of 8 bushings - enough for 4 Heim joints or one set of A-Arms.

USA MATERIALS / USA LABOR